MOTORMOUNTS STRUTS RUDDERS & TURNFINS COOLING COUPLERS FLEX & WIRE DRIVES BUSHINGS, THRUST BEARINGS, DRIVEDOGS |
| Parts for the KING OF SHAVES |
Bullet Prop Nut for 4mm shaft
$3.75
$3.75
4mm Drive Dog $3.25
4mm Drive dog for EKOS Cat.
4mm Drive dog for EKOS Cat.
These couplers are 2mm longer but have 4 set
screws on the cable and 2 on the motor and are
larger set screws. $13.50 each. Two sizes
available for adding 380XL motors--1/8" x .130
screws on the cable and 2 on the motor and are
larger set screws. $13.50 each. Two sizes
available for adding 380XL motors--1/8" x .130
These cables are slightly larger and stronger.
You should get the new couplers below if you
want a stronger set up. Soldered ends.
$22.00 per pair. New stuffing tube included.
You should get the new couplers below if you
want a stronger set up. Soldered ends.
$22.00 per pair. New stuffing tube included.
Coupler for 1/8" or 4mm motor shafts
to .062 wire dirives. You can run the
stock motors with these or the XL
motors with 1/8" shaft. Select the size
below. $13.50 each.
to .062 wire dirives. You can run the
stock motors with these or the XL
motors with 1/8" shaft. Select the size
below. $13.50 each.
.062 Wire drive with 4mm shaft and 10" long for
the EKOS. Less resistance and faster. No more
left and right cables. Fits stock stuffing tube and
strut. Order the correct coupler above. $24.00 for
a set. (Coupler not included)
the EKOS. Less resistance and faster. No more
left and right cables. Fits stock stuffing tube and
strut. Order the correct coupler above. $24.00 for
a set. (Coupler not included)